Arkon FREESTYLE NAVIGATOR User Manual Download Page 50

Page: 50 / 195

Top of the Sensor

Support Mount

Steps

Do This

Attach the sensor delivery unit

to your skin.

a. Locate the top of the sensor support mount.

b. Follow the instructions below as you place the

sensor support mount, adhesive-side down, on
the insertion site:

10.

Ensure that the adhesive pad is

adhered to your skin.

a. Hold the sensor delivery unit firmly in place.

b. Smooth the adhesive pad against your skin.

• Inserting the sensor on the

back of your arm.

Place the sensor support mount lengthwise

on your arm with the top of the sensor

support mount facing your shoulder.

• Inserting the sensor on your

abdomen.

Place the sensor support mount horizontally

on your abdomen.

If you are

Then

Customer Care: 1-866-597-5520

Section 5

Insert or Remove Your Sensor

Summary of Contents for FREESTYLE NAVIGATOR




































































































































































































Search results

Summary of Contents for FREESTYLE NAVIGATOR

Reviews:

Related manuals for FREESTYLE NAVIGATOR

Brands by name

Popular brands

Arkon FREESTYLE NAVIGATOR, User Manual

Search results

Summary of Contents for FREESTYLE NAVIGATOR

Reviews:

Related manuals for FREESTYLE NAVIGATOR

Brands by name

Popular brands