OVER
Alarms and Errors
Status Information
(con’t)
CM Status.
Stores recent error codes related to the Continuous
Monitoring mode (may be useful when calling Customer
Care).
Note: The CM Status screen shows information about
calibration and sensor errors. You can get information
about why the system did not prompt you to perform a
calibration (“Can’t Cal: xxx”) or why a calibration failed (“Cal
Failed: xxx”) or why continuous glucose readings are not
displayed (“Sen Err: xxx”). These numbers and information
help troubleshoot your system performance. The Customer
Care representative may ask you to access the CM Status
information.
Calibration BG.
Allows you to add a new blood glucose reading used for
calibration. Use this selection ONLY at the request of a
Customer Care representative.
Note: Once you use this feature to successfully perform an
additional calibration, the system discards the parameters
from the previous calibrations. It begins to calculate glucose
results based on this calibration. When using the Calibration
BG feature, always perform an additional Blood Glucose
mode test to confirm the first test.
This feature cannot be used in the first ten hours after sensor
insertion. Using this feature does not change the regular
scheduled times for calibration.
Status Information
Description
Fig. 1
Fig. 2
Display
Description
The system will notify you of any conditions that may need
your attention through messages that will be displayed on
your receiver screen. You can find out what those messages
mean and how to respond to them. For example, see Fig. 1.
The messages are arranged alphabetically in the table titled
“Respond to alarm message”.
When you use your built in FreeStyle Meter to make
measurements, you may receive error codes on the receiver.
You can find out how to respond when you get those codes.
For example, see Fig. 2.
Section 10
91
Respond to Alarms, Errors, and Problems
CM Status 08:30A
Last Reset: OK
Can’t Cal: 6
Cal Failed: BG High
Sensor Err: 207
Back Main
08:30A
Yes No
Do You Want To
Calibrate?
Glucose CM 03:00A
85
mg/dL
Acknowledge Main
Projected Low
Glucose
Glucose BG 08:30A
Er1
Home
Summary of Contents for FREESTYLE NAVIGATOR
