Arkon FREESTYLE NAVIGATOR User Manual Download Page 148

Page: 148 / 195

Steps

Do This

Access the Reset User

Settings screen.

a. Press the UP or DOWN Arrow button to highlight

Reset User Settings.

b. Press the RIGHT Option button (Select) to go to the

Reset User Settings Screen.

Reset your settings.

Confirm what you want to do:

Check your work.

Result:

Your receiver with the settings you want.

You have done this procedure correctly when the
receiver’s settings match your desired settings:

Default settings OR,

Your personal settings (if you changed your mind).

END OF Section 15

• Return your system to its

default settings.

Press the RIGHT Option button (Yes).
Note: You will lose your personal settings.

• Change your mind.

Press the LEFT Option button (No).
Note: Your personal settings will be retained.

If you want to

Then

Caution:

You should never reset your user settings

when you are wearing a sensor. This will reset

parameters that may affect your system performance.

Customer Care: 1-866-597-5520

138

Section 15

Reset User Settings

System Menu 08:30A
  Status
  Link
  Set Date/Time
  Country Settings

Reset User Settings

Main Select

08:30A

Are You Sure

You Want To

Reset to Default?

No Yes

Summary of Contents for FREESTYLE NAVIGATOR




































































































































































































Search results

Summary of Contents for FREESTYLE NAVIGATOR

Reviews:

Related manuals for FREESTYLE NAVIGATOR

Brands by name

Popular brands

Arkon FREESTYLE NAVIGATOR, User Manual

Search results

Summary of Contents for FREESTYLE NAVIGATOR

Reviews:

Related manuals for FREESTYLE NAVIGATOR

Brands by name

Popular brands