manualshive.com logo in svg

Arkon FREESTYLE NAVIGATOR, User Manual, Page: 69 / 195

Share
Download
Arkon FREESTYLE NAVIGATOR User Manual Download Page 69

OVER

Steps 

Do This

4.

  Prepare for lancing. 

(con’t)

g. Select the lancing device depth setting.

•  The FreeStyle® Lancing Device offers four different 

depth 

settings. Move the dial to the desired setting as shown 

in the depth indicator window. Level 1 is the shallowest 

depth; Level 4 is the deepest. To lance parts of the body 

other than the finger, we recommend that you start at 

Level (2) and use the clear cap.

To lance your finger, we recommend that you set the 

depth setting to its shallowest depth (1) and use the 

grey cap.

h. Pull the dark grey cocking handle out until it clicks.

Note: You may have already cocked the device in Step 4d.

i.  Prepare the site:

• A finger.

Set the depth setting to its shallowest depth (1).

• Your forearm.

Start at Level (2) or higher if your experience with 

setting 2 does not produce a usable sample.

  I

f you are lancing

 

Then

• A finger.

Warm your hand, lower it to waist level, and 

gently massage the finger.

• Your forearm.

Rub the test site vigorously until you feel it getting 

warm (three to five seconds).

 

If you are using 

Then to stimulate blood flow

 

Section 7 

59

 

 

Calibrate Your System/Test Blood Glucose Manually

Summary of Contents for FREESTYLE NAVIGATOR




































































































































































































Reviews:

No comments