Arkon FREESTYLE NAVIGATOR User Manual Download Page 161

Page: 161 / 195

OVER

18 Appendix B: Specifications

Operating Temperature

40º F to 104º F (4º C to 40º C).

Storage Temperature

Store the transmitter and receiver between 14º F (-10º C)

and 113º F (45º C). Store the test strips and sensor delivery

units between 37º F (3º C) and 86º F (30º C). Control

solution should be stored between 50º F (10º C) and 86º F

(30º C).

Operating Humidity (Receiver)

5% to 90% (non-condensing).

Operating and Storage Altitude

Sea level to 10,000 feet (3,048 meters).

Operating Pressure

14.7 psia (sea level) to 10.1 psia (10,000 feet).

Sensor Life

Up to 5 days.

Sensor Operating Skin Surface

Temperature

77º F (25º C) to 104º F (40º C).

Glucose Result Range

20 to 500 mg/dL (1.1 to 27.8 mmol/L).

Glucose Assay Method

(for CM mode)

Amperometric electrochemical sensor using WIRED

ENZYME™ technology. Continuous subcutaneous

measurement of glucose in interstitial fluid by a sensor

inserted approximately 5mm under the skin.

Power Source

Transmitter: One silver oxide 357 HC battery (small coin

cell battery), replaceable (battery life is ~ 30 days).

Receiver: Two AAA alkaline batteries, replaceable (battery

life is ~ 60 days). We recommend Energizer® MAX®,

Energizer® e2® Titanium®, and Energizer® Industrial batteries.

Other batteries may not provide expected battery life.

Transmitter Size

Height: 2.05 in. (5.2 cm). Width: 1.23 in. (3.1 cm).

Depth: 0.43 in. (1.1 cm).

Transmitter Weight

0.48 oz. (13.61 grams) – including battery.

Transmitter Battery Life

Up to 30 days.

Wearing Transmitter Under Water

Up to 1 meter under water for no more than 30 minutes.

System Specifications

Your FreeStyle Navigator system specifications are listed in the following table:

Section 18

151

Appendix B: Specifications

Summary of Contents for FREESTYLE NAVIGATOR




































































































































































































Search results

Summary of Contents for FREESTYLE NAVIGATOR

Reviews:

Arkon FREESTYLE NAVIGATOR, User Manual, Page: 161 / 195

Search results

Summary of Contents for FREESTYLE NAVIGATOR

Reviews: