Arkon FREESTYLE NAVIGATOR User Manual Download Page 154

Page: 154 / 195

Steps

Do This

Change the Decimal Format.

a. Use the UP or DOWN Arrow button to highlight

Decimal Format.

b. Press the RIGHT Option button (Select) to go to the

Select Decimal Format screen.

c. Use the UP or DOWN Arrow button to select either the

x.y or the x,y format.

d. Press the RIGHT Option button (Set) to accept your

choice.

Result:

The Country Settings screen is displayed.

e. Go to Step 2c to decide what to do next.

Check your work.

Result:

A display that presents information in the format

that you prefer.

You have done this procedure correctly when you are
satisfied with the format the system uses to display
information.

END OF Section 16

Customer Care: 1-866-597-5520

144

Section 16

Change Country Settings

Country Settings 08:30A
Language

(English)

Date Format

(mm-dd-yy)

Time Format

(12h)

Decimal Format (x. y)

Back Select

Summary of Contents for FREESTYLE NAVIGATOR




































































































































































































Search results

Summary of Contents for FREESTYLE NAVIGATOR

Reviews:

Related manuals for FREESTYLE NAVIGATOR

Brands by name

Popular brands

Arkon FREESTYLE NAVIGATOR, User Manual

Search results

Summary of Contents for FREESTYLE NAVIGATOR

Reviews:

Related manuals for FREESTYLE NAVIGATOR

Brands by name

Popular brands