Arkon FREESTYLE NAVIGATOR User Manual Download Page 152

Page: 152 / 195

Steps

Do This

Access the Country Settings

menu.

a. Press the UP or DOWN Arrow button to highlight

Country Settings.

b. Press the RIGHT Option button (Select) to go to the

Country Settings screen.

c. Decide what you want to do:

d. Press the LEFT Option button (Back) twice to return to

the Main menu.

e. Go to Step 7 to check your work.

Change the Language.

a. Use the UP or DOWN Arrow button to highlight

Language.

b. Press the RIGHT Option button (Select) to go to the

Select Language screen.

c. Use the UP or DOWN Arrow button to highlight the

language that you want to use.

d. Press the RIGHT Option button (Set) to accept your

selection.

Result:

The Country Settings screen is displayed.

e. Go to Step 2c to decide what to do next.

•

Language.

•

Date.

•

Time.

• Decimals.

• None of the above.

(you are done changing the country settings.)

If you want to change how

Then go

this is displayed

to Step

Customer Care: 1-866-597-5520

142

Section 16

Change Country Settings

Country Settings 08:30A

Language

(English)

Date Format

(mm-dd-yy)

Time Format

(12h)

Decimal Format (x. y)

Back Select

System Menu 08:30A

  Data Upload
  Status
  Link
  Set Date/Time

Country Settings

Main Select

Summary of Contents for FREESTYLE NAVIGATOR




































































































































































































Search results

Summary of Contents for FREESTYLE NAVIGATOR

Reviews:

Related manuals for FREESTYLE NAVIGATOR

Brands by name

Popular brands

Arkon FREESTYLE NAVIGATOR, User Manual

Search results

Summary of Contents for FREESTYLE NAVIGATOR

Reviews:

Related manuals for FREESTYLE NAVIGATOR

Brands by name

Popular brands