22
ATS4000 Manager’s Guide
1. P
ANEL STATUS
Use this function to list all zones that are in alarm, tamper alarm, inhibited or active and
any system alarms.
There are menu options available that display each of these conditions separately.
However, this option can be used to check on all zones that need attention. The status is
shown by the letter preceding the zone number:
Code
Zone
status
Meaning
A
Alarm
An alarm has occurred at this zone and must be acknowledged
and reset.
See the section,
Alarm
, on page 15.
T
Tamper
alarm
An alarm has occurred at this zone due to tamper or accidental
damage. The alarm must be acknowledged and reset. See the
section,
Alarm
, on page 15.
i
Inhibited
The zone has been excluded from functioning as part of the
security system. It is probably broken or faulty.
a
Active
The zone is activated and needs to be checked and fixed if
necessary to ensure security is maintained. e.g. Close the door.
To list all the state of all zones: Access menu option 1.
What happens next depends on the status of the zones:
No zones in alarm, tamper, inhibited or active
Zones in alarm, tamper alarm, inhibited or
active
Zones are listed either one at a time, or as a list of
numbers:
or
From the display you can now:
Option
Action
Result
Display the
complete zone
name
Enter the zone
number and
press
[ENTER]
Display the complete zone name
(Excludes the status
No alarms,
tampers, inhibit, active
).
Update the list
Press
[NEXT]
Update the list of zone status.
Exit
Press
[ENTER]
Exit the menu option and return to the
display “Code:“.
See also:
Menu option 2, Zones active
Menu option 3, Zones in alarm
Menu option 4, Zones inhibited
Summary On A2. Front Door Contact
NEXT or ENTER
Summary On A1, A3, T4, i5, i9.
Input No:
No Alarms, Tampers, Inhibits, Active
Press ENTER
Intelligent Security & Fire Ltd.
