Aritech ATS4000 Manager'S Manual Download Page 7

Page: 7 / 69

ATS4000 Manager’s Guide

DVISOR

MASTER

KEYPAD

Figure 1: The keypad

The keypad

➀

0 - 9

Used to enter alphanumeric information.

➁

Used after entering your PIN code to tell the system that you want to arm your
area(s).

(some arming stations may have a # as ON key)

➂

OFF

Used after entering your PIN to tell the system that you want to disarm your
area(s).

(some arming stations may have a * as OFF key)

➃

ENTER

•

Used when information is to be processed (similar to the Enter key on a

computer).

•

Scroll forwards in the menu.

(some arming stations may have a # as ENTER key)

➄

MENU*

•

Display the menu login prompt.

•

Backspace to correct an error.

•

Scroll backwards in the menu.

(some arming stations may only have the * without the word menu)

➁

NEXT

•

Display the next items in a menu list.

•

Update the information displayed.

(available on some arming stations only)

➆

[CLEAR]

Exit the current function or operation and return to alarm control prompt.

(available on some arming stations only)

➇

LCD display

Used to display messages.

➈

Area LED

Used to display the status of the areas.

Intelligent Security & Fire Ltd.

Summary of Contents for ATS4000






































































Search results

Summary of Contents for ATS4000

Reviews:

Brands by name

Popular brands

Aritech ATS4000, Manager'S Manual

Search results

Summary of Contents for ATS4000

Reviews:

Brands by name

Popular brands