20
ATS4000 Manager’s Guide
T
HE
A
DVISOR
MASTER
MENU
The Advisor MASTER menu has 23 options available for performing various functions.
Some of the functions are specific only to certain installations, while others might not be
authorised to you. Therefore, you are unlikely to see all the menu options when you
access the menu, but only those which have been programmed to be available when
your PIN code is used. As manager of the system, your PIN code will have been
programmed by the installer to access a wider number of the menu options than the
general user.
If you access the menu and do not use any keys for two minutes, you will automatically
exit from the menu. It is good practice to ensure you exit the menu using 0 [ENTER] or
[CLEAR} rather than the time out facility. If anyone else uses the menu before it times
out, the functions they use would be logged against your PIN code.
If you attempt to select an option that is not authorised to your PIN, the display will show
the message:
You are not authorised to enter
.
Although you might be authorised to access a menu option, you might not be allowed to
access all the information it provides. You will only be allowed to access information on
the areas assigned to your PIN code.
How the menu option sections are organised in this manual
The menu options are numbered from 1 to 24 in the Advisor MASTER system. This
numbering system is also used in this manual, so menu option 1 “
Panel status
” is chapter
number 1 “
Panel status
”.
To access a menu option
1.
Before commencing, ensure that the prompt below is shown on the bottom line of
the display:
2.
Press
[MENU*]
.
The display shows:
3.
Enter your PIN code and press
[ENTER]
The display shows:
There Are No Alarms in This Area
Code:
To Access Menu Enter Code
Code:
0-Exit ENTER-Down *-Up
0-Exit, Menu:
Intelligent Security & Fire Ltd.
