manualshive.com logo in svg

Aritech ATS4000, Manager'S Manual

Share
Download
Aritech ATS4000 Manager'S Manual Download Page 40

ATS4000 Manager’s Guide

37

The test is completed

The test is not completed

7. 

Press 

[ENTER]

 to return to the menu.

14. P

ROGRAM USERS

Use this function to add, delete or create a user. Your system might have been set up to
require two authorised users to enter this menu.         

The user programming includes a record of:

•

 

The control panel user (or card) number. This is a number between 1 and 11,466
(see note below) which is used by the system to link a PIN code or card to the
functions it will perform and the doors it can enter.

When programming cards, the ID number programmed in the card is the user
number (unless your system uses a card offset).

•

 The 

user’s 

alarm group,

 which determines the user's area(s) and alarm control

functions. e.g. Manager, Staff etc.  

✍

 

Your own alarm group might not allow you to program PIN codes. If it does
allow use of the function, there might still be restrictions on which alarm groups
you are allowed to update.

•

 The 

users 

door group,

 which determines which doors the user has access to.

•

 The 

users 

floor group

, which determines which floors the user has access to.

•

 

The user’s name (some users only).

•

 

The user’s PIN code (some users only). Note that card ID numbers are NOT
programmed as the PIN code.

✍

 

Only 50 users with name, PIN code and/or card can be programmed in a
system with standard memory.

In a system with an expanded memory:

- Only the first 200 users can have their name programmed to their user

number.

- Only the first 1000 users can have a PIN code assigned to them.

- Users 1 to 1000 can have a PIN code and/or card.

- Users 1001 to 11,466 can only have a card.

Test Completed
Press ENTER

Test Not completed
Press ENTER

Intelligent Security & Fire Ltd.

Summary of Contents for ATS4000






































































Reviews:

No comments

Brands by name

Popular brands

Load more brands