manualshive.com logo in svg

Aritech ATS4000, Manager'S Manual

Share
Download
Aritech ATS4000 Manager'S Manual Download Page 15

12

ATS4000 Manager’s Guide

D

ISARMING YOUR SYSTEM

When to disarm

If the area you want to enter is armed, you must first disarm the alarm system before you
can enter, otherwise you will set off the alarm. You will know which zone is armed
because it’s LED on the keypad will be lit red.

The time limit when disarming

On entering the area, the system will allow you a preset time to disarm before an alarm
occurs

Disarming when there is an alarm

If there is an alarm condition when you are disarming the system, the alarm is reset. You
must then find out what caused the alarm and fix it. Use the function “Listing past alarm
events” to get a list of all the alarms that recently have happened (see page 19).

When you cannot disarm

You might not be authorised to disarm specific areas in the premises. See the earlier
section “When you cannot arm/disarm” on page 9 for more information.

To disarm the system

1. 

Before commencing, if there is no alarm in the area, the display must show:

2. 

Enter your PIN code.

3. 

Press 

[OFF]

.

4. 

The result of step 3 depends on:

•

 

Whether the system has been programmed to display a list of the areas
assigned to your PIN.

Areas not displayed:

If your system has not been programmed to display a list of the areas assigned to
your PIN, all armed areas are now automatically disarmed (provided all zones were
normal). The display returns to that shown in step 1.

Areas displayed:

If a list of the areas assigned to your PIN are displayed, all armed areas are now
listed.

e.g.

There Are No Alarms In This Area
Code:

0-All 1, Office 2, Boardroom 3, Workshop
Enter Area:

Intelligent Security & Fire Ltd.

Summary of Contents for ATS4000






































































Reviews:

No comments

Brands by name

Popular brands

Load more brands