Aritech ATS4000 Manager'S Manual Download Page 22

Page: 22 / 69

ATS4000 Manager’s Guide

ISTING PAST ALARM EVENTS

This list provides you with a quick alarm history. It is a fast and easy way to review where
alarms have happened. This information is useful when you have had to reset an alarm
without initially checking its cause.

To list past alarm events

Before commencing, the display must show:

Press

[ENTER]

twice.

✍

You do not need to enter your PIN code.

The display shows the following details of each alarm (the most recent alarm is
shown first):

•

The time the alarm occurred as hour and minutes - HH:MM.

•

The date the alarm occurred as day and month - DD:MM.

•

The type and location of the alarm.

e.g.

From the history display you can now:

Option

Action

Result

Scroll backwards

Press

[ENTER]

Scroll backwards through the alarm
history one by one.

Scroll forwards

Press

[NEXT]

Scroll forwards through the alarm
history one by one.

Exit

Press

Exits and returns to the original
display

View the complete
event desciption

Press

View the complete details for this
event.

See also :

Menu option 5, History.

There Are No Alarms In This Area
Code:

*13:23 31/10 LOCAL ALARM Zone 1 Fire D> 1-
1-Scan, 0-Exit

Intelligent Security & Fire Ltd.

Summary of Contents for ATS4000






































































Search results

Summary of Contents for ATS4000

Reviews:

Related manuals for ATS4000

Brands by name

Popular brands

Aritech ATS4000, Manager'S Manual

Search results

Summary of Contents for ATS4000

Reviews:

Related manuals for ATS4000

Brands by name

Popular brands