Aritech ATS4000 Manager'S Manual Download Page 45 | Manualshive

Page: 45 / 69

background image

42

ATS4000 Manager’s Guide

8.

If the user number that you are programming is higher than 1000, then all options
available have been programmed and the display returns to step 1.

If the system has been programmed so that users do not have name files, or if you
are programming a user higher than 200, skip to step 10.

The display shows.

9.

You can now enter a user’s name of up to 16 characters, by using the text option on
the keypad.

Keys 1 to 9 have alphabetical characters printed above them. To enter a letter, press
the key the number of times relative to the position of the letter. Both upper and
lower case letters are available as well as the numerical values. See Figure 2 for
details.

Do one of the following options:

Option

Action

Enter the letters of the user’s name.

Enter each letter of the
user’s name followed
by

[ENTER]

.

Move the cursor to the position after the name.

Press

[ENTER]

Save the name. (And display the new name if
programmed/changed.)

If the name has been changed, only letters preceding
the cursor are saved.

Press

[MENU*]

10.

When finished entering the name, press

[MENU*]

to save the displayed setting, and

skip the remaining user flags.

CAUTION: When programming name text, the [ENTER] key is ONLY used to move the
cursor. Follow the procedure carefully when programming name text. Use [MENU*] to
save and exit.

11.

The display shows.

e.g.

•

Enter the PIN code for this user (see Notes 3, 4, 5, and 6) and press

[ENTER]

to save the PIN code. Then press

[ENTER]

again to return to step 1.

✍

1.

You cannot create a user unless your alarm group authorises you to do so.

2.

You cannot assign an alarm group to a user unless the alarm group has the
option "Can this Alarm Group be Assigned to Users" set to YES, and your
alarm group has all the "Areas" and "User Menu Options" of the alarm group
you wish to assign. If the alarm group you wish to assign has "Alarm System
Control" and "Modem Access" set to YES, then your alarm group must also
have these features set to YES.

Your Name is , (*)-End

Pin Code:
Code:

!

Intelligent Security & Fire Ltd.

«
...
43
44
45
46
47
...
»

Summary of Contents for ATS4000






































































Reviews:

No comments

Related manuals for ATS4000

Brand: Handicare Pages: 56

Brand: 3M Pages: 34

SmartSwitch 6000

Brand: Cabletron Systems Pages: 76

Brand: D+H Pages: 14

Brand: hager Pages: 62

coviva Smartbox TKP100A

Brand: hager Pages: 45

Brand: Samson Pages: 20

Brand: National Instruments Pages: 40

Brand: National Instruments Pages: 28

Brand: National Instruments Pages: 7

Brand: National Instruments Pages: 22

Brand: Balboa Pages: 74

Brand: Cadac Pages: 4

Brand: Parker Pages: 42

Brand: Trane Technologies Pages: 8

Home easy HE-440

Brand: CH Byron Pages: 2

Brand: RTI Pages: 2

Brand: Phoenix Contact Pages: 40

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands