Aritech ATS4000 Manager'S Manual Download Page 16

Page: 16 / 69

ATS4000 Manager’s Guide

From this display you have several options:

Option

Action

Result

Disarm all areas

Press

and

[ENTER]

Disarms all areas at once. Returns
you to the original display.

Disarm individual
areas

Enter area number
and press

[ENTER]

When finished
disarming, press

[ENTER]

again.

Disarms the selected area. If there
are more armed areas, they will be
displayed.

Exit

Press

[CLEAR]

and

[ENTER]

Exit and return to the original display.
Areas already disarmed, stay
disarmed.

Display more areas

Press

[NEXT]

Displays the next armed area in the
list. You can then select an area to
be armed, or continue to press
[NEXT].

The

area

LED(s) extinguish when the disarming procedure has been successful.

Intelligent Security & Fire Ltd.

Summary of Contents for ATS4000






































































Search results

Summary of Contents for ATS4000

Reviews:

Related manuals for ATS4000

Brands by name

Popular brands

Aritech ATS4000, Manager'S Manual

Search results

Summary of Contents for ATS4000

Reviews:

Related manuals for ATS4000

Brands by name

Popular brands