14
ATS4000 Manager’s Guide
A
CTIVE ZONES
(W
HEN ARMING
)
You cannot arm (or disarm, if your system is programmed that way) an area unless all the
zones in that area are normal, as an active zone would usually set off an alarm. For
example, all the doors and windows must be closed.
If a zone is active while you try to arm or disarm an area, the Advisor MASTER keypad
sounds seven quick beeps and displays the active zones.
Active zones are listed either:
One at a time
e.g
Or
As a list of numbers
e.g
From either display:
Action
Result
Press
[NEXT]
Update the list of active zones and display the next zones in the
list (if any).
Enter area number
and press
[ENTER]
.
Display the zone name in full.
Press
[CLEAR]
Exit the function and return to the display shown when you were
attempting to arm the system.
After you have determined which zones are active, you must check these and correct the
problem (e.g. close the door) then exit this display, and try again to arm If you are unable
to close the zone, refer to Menu option 10, Inhibit Zone.
See also:
Arming Your System
Disarming Your System
Inhibit Zone - Menu Option 10
Active On 6. Front Door
NEXT or ENTER
Active On 6, 7, 9.
Zone No:
Intelligent Security & Fire Ltd.
