ATS4000 Manager’s Guide
35
12. T
EST ZONE
Use this function to test if an individual zone is operating correctly.
To test a zone
1.
Access menu option 12.
The display shows:
2.
Enter the zone number you want to test and press
[ENTER]
, or
press
[ENTER]
to exit and return to the menu.
3.
If you selected a zone, one of four responses is displayed:
•
The zone is normal
e.g.
•
The zone is active
e.g.
•
There is a faulty condition due to cable tamper. The cabling to the zone
shows an OPEN circuit.
e.g.
•
There is a faulty condition due to cable tamper. The cabling to the zone
shows a SHORT circuit.
e.g.
4.
Press
[ENTER]
to exit and return to the menu option display.
✍
1.
If a zone is active, open or short, the keypad emits a continuous tone. When
the status of the zone is changed to normal, the display is updated and the
tone stops.
2.
If the zone is inhibited when a test is requested on it, the system uninhibits the
zone, conducts the test, and then returns the zone back to inhibited.
3.
The test must be carried out within a pre-determined time. If the test is not
completed within this time, the option is exited.
Test Individual Zone:
Zone No:
NORMAL STATE on 12, Roller Door
OPEN on 12, Roller Door
SHORT on 12, Roller Door
ACTIVE on 12, Roller Door
Intelligent Security & Fire Ltd.
