Aritech ATS4000 Manager'S Manual Download Page 31

Page: 31 / 69

ATS4000 Manager’s Guide

DISARM TEST

All zones tested successfully

Untested zones

Untested zones are listed either one at a time, or
as a list of numbers:

All cameras tested successfully

(press ENTER to display)

Untested cameras

(press ENTER to display)

From the display you can now:

Option

Action

Display complete zone name

Enter the zone number and
press

[ENTER]

Update the list of zones and display the remaining
zone (if any)

Press

[NEXT]

If zone test report is displayed, display the camera
test results (if applicable)

Press

[ENTER]

Exit

Press

[ENTER]

•

Arm test:

ARM TEST

All zones tested successfully

Untested zones

Untested zones are listed either one at a time, or
as a list of numbers:

No Untested Zones
Press ENTER

Untested Arm On 17, Rear Door Contact
NEXT or ENTER

All Cameras Have Tested Successfully
Press Enter

Untested Arm On 9, 14, 17.
Zone No:

Untested Disarm On 25, Reception Hold UP
NEXT or ENTER

Untested Disarm On 25, 26, 27.
Zone No:

No Untested Zones
Press ENTER

Untested Arm On 17, Rear Door Contact
NEXT or ENTER

Intelligent Security & Fire Ltd.

Summary of Contents for ATS4000






































































Search results

Summary of Contents for ATS4000

Reviews:

Related manuals for ATS4000

Brands by name

Popular brands

Aritech ATS4000, Manager'S Manual

Search results

Summary of Contents for ATS4000

Reviews:

Related manuals for ATS4000

Brands by name

Popular brands