173
XM387
XM386
13. Install the ratchet block and tensioner; then set the
tensioner in the fifth notch in the block as it is self
tightening.
XM385
14. Install the chain case cover/oil tank assembly and
secure with the existing screws (threads coated with
blue Loctite #243). Tighten in a crisscross pattern to
12 ft-lb. Fill the chain case with 15 oz. of Arctic Cat
Chain Lube.
15. Connect the speed and oil sensor connector.
16. Install the right-side footrest support and secure to
the belly pan using the existing screws.
17. Install the resonator.
18. Secure the lower console to the skid panels; then
install the hood and both access panels.
REMOVING CHAIN CASE/DRIVEN
SHAFT/DRIVESHAFT/TRACK (4000
LXR)
1. Remove the left- and right-side panels, hood; then
loosen the quarter turns securing the lower console to
the skid panels and secure out of the way.
2. Remove the drive and driven clutches.
3. Remove the screws securing the PTO engine mount
plate to the engine and the chassis.
4. Remove the resonator; then remove the right-side
footrest.
5. Remove the torx-head screw securing the belly pan
to the right-side footrest support.
6. Disconnect the speed sensor connector and the oil
level connector.
7. Place a drain pan under the chain case; then loosen
the eleven screws securing the chain case cover/oil
tank assembly to the chain case housing starting with
the bottom screws first.
8. Remove the chain case cover/oil tank and set out of
the way leaving the oil hose(s) connected. Account
for a thrust washer on the countershaft.
SNO-964A
9. Remove the reverse gear, reverse fork, reverse shift
rack, and the reverse shift shaft as an assembly.
10. Remove the retaining ring from the driveshaft; then
remove the reverse chain and sprockets. Account for
a thrust washer.
SNO-965A
11. Release tension on the chain tensioner; then remove
the ratchet block. The tensioner does not need to be
removed.
Summary of Contents for M 8000
