Arctic Cat M 8000, Service Manual

Page: 108 / 210

107
FC121
5. Remove the oil-injection pump retainer and shaft
from the opposite side of the crankcase. Account for
the thrust washer located between the retainer and
shaft flange.
FC122
6. Using the long seal driver, drive the water pump
mechanical seal from the crankcase.
FC123
7. Using a pair of snap ring pliers, remove the snap ring
securing the inner seal in the crankcase.
FC124
8. Using the hooked end of the long seal driver, pull the
inner seal free of the crankcase.
ASSEMBLING
1. Wipe the seal area clean using a clean rag.
FC125
2. Position the inner seal onto the seal driver (spring
side towards the crankshaft). Gently tap into posi-
tion.
FC126A
3. Using a small screwdriver, apply a light coat of
grease to the inner seal lips.