6RL SERIES OPERATION MANUAL
SECTION 6: FRONT PANEL OPERATION
Entire Contents Copyright
2018 by Adaptive Power Systems, Inc. (APS) • All Rights Reserved • No reproduction without written authorization from APS.
6RL Series Regenerative DC Load Operation Manual
Page 79 of 204
6.4.10.4
Log file format
Type: text file in European or US American CSV format (depending on the selected setting)
Layout (US format shown):
Legend:
U set / I set / P set / R set: Set values
U actual / I actual / P actual / R actual: Actual values
Error: unit alarms
Time: elapsed time since logging start
Unit mode: actual regulation mode (also see section 3.4, “Operating Modes”).
Note: R set and R actual are only recorded if UIR mode is active (refer to section 3.4.5)
Note: Unlike the logging on PC, every log started creates a new log file with a sequence
counter in the file name, normally starting with 1, depending on existing files.
6.4.10.5
Special notes and limitations
Following provisions apply to data logging:
Max. log file size (due to FAT32 formatting): 4 GB
Max. number of log files in folder HMI_FILES: 1024
With setting “Start/stop with DC Input ON/OFF”, the logging will also stop on alarms
or events with action “Alarm”, because they switch off the DC Input
With setting “Manual start/stop” the unit will continue to log even on occurring
alarms, so this mode can be used to determine the period of temporary alarms like
OT or PF
Summary of Contents for 6RL Series
Page 203: ......