6RL SERIES OPERATION MANUAL
SECTION 6: FRONT PANEL OPERATION
Entire Contents Copyright
2018 by Adaptive Power Systems, Inc. (APS) • All Rights Reserved • No reproduction without written authorization from APS.
6RL Series Regenerative DC Load Operation Manual
Page 71 of 204
IF
Level 1
Level 2
Level 3
Description
Eth
e
rn
e
t /
M
o
d
Bu
s-
TC
P,
1 &
2 Po
rt
IP Settings 1
DHCP
The IF allows a DHCP server to allocate an IP address, a subnet
mask and a gateway. If no DHCP server is in the network then
network parameters will be set as defined in item “Manual”
Manual
IP address
This option is activated by default. An IP address can be
manually allocated.
Gateway
Here a gateway address can be allocated if required..
Subnet mask
Here a subnet mask can be defined if the default subnet mask
is not suitable.
DNS address 1
DNS address 2
Here the addresses of the first and second Domain Name
Servers (DNS) can be defined, if needed.
Port
Range: 0...65535. Default ports:
5025 = Modbus RTU (all Ethernet interfaces)
Reserved ports which must not be set with this parameter:
502 = Modbus TCP (Modbus-TCP interface only)
other typical reserved ports
IP Com
Settings P1
IP Com
Settings P2
AUTO
Settings for the Ethernet port such as transmission speed are
set automatically.
Manual
Half duplex
Manual selection for transmission speed (10MBit/100MBit)
and duplex mode (full/half). It is recommended to use the
“AUTO” option and only revert to “Manual” if these
parameters fail.
Full duplex
10MBit
100MBit
Host name
Free choice of host name (default: Client)
Domain name
Free choice of Domain (default: Workgroup)
TCP Keep-Alive
Enable TCP keep-alive
IF
Level 1
Level 2
Level 3
Description
Pr
o
fi
n
e
t/
IO
, 1 &
2 Po
rt
IP Settings
DHCP
The IF allows a DHCP server to allocate an IP address, a subnet
mask and a gateway. If no DHCP server is in the network then
network parameters will be set as defined in point “Manual”
Manual
IP address
This option is activated by default. An IP address can be
manually allocated.
Gateway
Here a gateway address can be allocated if required..
Subnet mask
Here a subnet mask can be defined if the default subnet mask
is not suitable.
DNS address 1
DNS address 2
Here the addresses of the first and second Domain Name
Servers (DNS) can be defined, if needed.
Host name
Free choice of host name (default: Client)
Domain name
Free choice of Domain (default: Workgroup)
Function Tag
String input box for a user-definable text, which describes
the Profinet slave function tag. Max. length: 32 characters
Location Tag
String input box for a user-definable text, w h i c h describes
the Profinet slave location tag. Max. length: 22 characters
Station Name
String input box for a user-definable text, which describes
the Profinet station name. Max. length: 54 characters
Description
String input box for a user-definable text, which describes the
Profibus slave. Max. length: 54 characters
Installation Date
String input box for a user-definable text, which describes
the Profibus slave installation date tag. Max. length: 40
characters
Summary of Contents for 6RL Series
Page 203: ......
