APS 6RL Series, Operation Manual

Page: 185 / 204

6RL SERIES OPERATION MANUAL
SECTION 7: REMOTE PROGRAMMING
Entire Contents Copyright

2018 by Adaptive Power Systems, Inc. (APS) • All Rights Reserved • No reproduction without written authorization from APS.
6RL Series Regenerative DC Load Operation Manual Page 185 of 204
Bit configuration of the device status value:
Bit Name Meaning Bit Name Meaning
31 Remote control 1 = on 15 -
30 Input / output 1 = on (req., register
405) 14 Alarm OVD 1 = alarm active
29 Volt. reg. speed 1 = fast (register 422) 13 Alarm OVP 1 = alarm active
28 UIP/UIR 1 = UIR (Register 409) 12
Alarm PF
1 = alarm active
27 Alarms 1 = at least 1 alarm
active 11
26 Alarm MSS 1 = alarm active 10
25 Alarm OCD 1 = alarm active 9 REMSB 1 = on (register 505, bit
30)
24 Alarm OCP 1 = alarm active 8 Alarm UCD 1 = alarm active
23
Interface in access register 505, bits 4-0
7 Alarm UVD 1 = alarm active
22 6 Remote sensing 1 = external, 0 = internal
21 5 Function gen. 1 = FG active
20 4 MS type 1 = master, 0 = slave
19 3 Input / output 1 = on (register 505, bit 7)
18 Alarm OPD 1 = alarm active 2 Reg. mode Register 505, bits 10-9
17 Alarm OPP 1 = alarm active 1
16 Alarm OT 1 = alarm active 0 -
Access: Base ID Cyclic Read + 1 (Actual values).
Bytes 0-1 Bytes 2-3 Bytes 4-5
Register 507 Register 508 Register 509
Actual voltage Actual current Actual power
Access: Base ID Cyclic Read + 2 (Set values)
Bytes 0-1 Bytes 2-3 Bytes 4-5 Bytes 6-7
Register 500 Register 501 Register 502 Register 503
Set value of voltage Set value of current Set value of power Set value of resistance
Access: Base ID Cyclic Read + 3 (Adjustment limits 1)
Bytes 0-1 Bytes 2-3 Bytes 4-5 Bytes 6-7
Register 9002 Register 9003 Register 9000 Register 9001
I-max I-min U-max U-min
Access: Base ID Cyclic Read + 4 (Adjustment limits 2)
Bytes 0-1 Bytes 2-3
Register 9004 Register 9006
P-max R-max