APS 6RL Series, Operation Manual

Page: 22 / 204

6RL SERIES OPERATION MANUAL
SECTION 3: PRODUCT OVERVIEW
Entire Contents Copyright

2018 by Adaptive Power Systems, Inc. (APS) • All Rights Reserved • No reproduction without written authorization from APS.
6RL Series Regenerative DC Load Operation Manual Page 22 of 204
The unit is not fitted with any protection from external over voltages.
3.6.4 Over Current Protection
An overcurrent alarm (OCP) will switch off the DC Input and can occur if:

The input current at the DC Input exceeds the set OCP limit.
This function serves to protect the connected voltage or current source so that this is not
overloaded and possibly damaged, rather than offering protection to the electronic load.
3.6.5 Over Power Protection
An Over Power Protection alarm (OPP) will switch off the DC Input and can occur if:

The product of the input voltage and input current in the DC input exceeds the
adjusted OPP limit
.
This function serves to protect the connected voltage or current source so that this is
not overloaded and possibly damaged, rather than offering protection to the electronic
load.
3.7 Accessories Included
The following accessories are included with each 6RL Series DC load. If one or more of these
is missing upon incoming inspection of the product, please contact Adaptive Power Systems
customer service.
Item Description Quantity
A Share Bus plug 1
B Remote sensing plug 1
C 1.8 m USB cable 1
D Set of DC terminal covers 1 Set
E Share/Sense terminal cover (only for models from 750 V) 1
F USB stick with documentation and software 1
G AC connector plug (clamp type) 1
H Strain relieves (pre-mounted) 1 Set
Table 3-1: Included Accessories