6RL SERIES OPERATION MANUAL
SECTION 7: REMOTE PROGRAMMING
Entire Contents Copyright
2018 by Adaptive Power Systems, Inc. (APS) • All Rights Reserved • No reproduction without written authorization from APS.
6RL Series Regenerative DC Load Operation Manual
Page 172 of 204
Slot Slot name
Description
3
Act. current & acyclic slot 3
Cyclic: Actual current of DC input/output
Acyclic: all registers (indexes) assigned to slot 3
4
Act. power & acyclic slot 4
Cyclic: Actual power of DC input/output
Acyclic: all registers (indexes) assigned to slot 4
5
Acyclic slot 5
Acyclic: all registers (indexes) assigned to slot 5
6
Acyclic slot 6
Acyclic: all registers (indexes) assigned to slot 6
7
Acyclic slot 7
Acyclic: all registers (indexes) assigned to slot 7
8
Acyclic slot 8
Acyclic: all registers (indexes) assigned to slot 8
Transfer of the above table to the HW CONFIG of Siemens Simatic:
The address ranges can of course be re-arranged as required. The slots for acyclic access
don't need an output address range, because the input address range already reserves
memory space for both directions.
7.13.4
Slot configuration for Profinet
The GSDML (available from the included USB stick or as download) does not offer automatic
slot configuration. When loading the file the correct version for the interface module in use
(1 port or 2 port) must be selected. After that, the slot placement has to be done by the user
like this:
Slot Slot name
Description
1
Input 2 words
Cyclic: Unit status (register 505, see register list)
Acyclic: all registers (indexes) assigned to slot 1
2
Input 1 word
Cyclic: Actual voltage of DC input/output (register 507, see register list)
Acyclic: all registers (indexes) assigned to slot 2
3
Input 1 word
Cyclic: Actual current of DC input/output (register 508, see register list)
Acyclic: all registers (indexes) assigned to slot 3
4
Input 1 word
Cyclic: Actual power of DC input/output (register 509, see register list)
Acyclic: all registers (indexes) assigned to slot 4
5
Input 1 word
Acyclic: all registers (indexes) assigned to slot 5
6
Input 1 word
Acyclic: all registers (indexes) assigned to slot 6
7
Input 1 word
Acyclic: all registers (indexes) assigned to slot 7
8
Input 1 word
Acyclic: all registers (indexes) assigned to slot 8
Transfer of the above table to the HW CONFIG of Siemens Simatic:
Summary of Contents for 6RL Series
Page 203: ......
