APRILIA Pegaso 650 I.E., Service Manual

Page: 28 / 320

GENERAL INFORMATION
1 - 18
Pegaso 650 I.E.
#/.35-!",%3
Only use the products given below for any mainte-
nance work.
The materials mentioned have been tested for many
years and are suitable for all the application condi-
tions indicated by the manufacturer.
1.9.1 PRODUCT PROPERTIES
APRILIA
part# (product) Use and properties
aprilia part# 0897651 [LOCTITE
®
243 Blue (10 cm³)]
Adhesive in paste for screws and nuts up to M36 and for
couplings with medium hold.
It can be used on parts which have not been completely
degreased.
The hardening time depends on the temperature and the
material (maximum one hour).
Resistance to temperatures in the range – 55 to 150 °C (– 99 to
302 °F).
aprilia part# 0898011 (fluorescent
green LOCTITE
®
275)
It prevents the loosening of the threaded components and the
fluid leakages due to vibrations.
It must be used on clean, degreased and non-oxidized
components.
Apply a quantity sufficient to cover all the threaded part.
aprilia part# 0899788 [LOCTITE
®
648 green (5 g)]
Paste for strong fastening of screws.
The hardening time depends on the temperature and the
material (maximum twelve hours).
Resistance to temperatures in the range -55 to 175 °C ( – 99 to
347 °F).
In order to release the part glued, it may be necessary to heat
the coupled parts to a temperature of 250 °C (482 °F).
aprilia part# 0899784 (LOCTITE
®
574 orange)
Solvent-free seal in paste, to be used instead of seals where
there is a high friction factor and where a precise distance is
required between the two components.
Applied in its liquid state, it hardens after assembly on contact
with the metal within a few hours.
A seal is created whose surface structure adapts to the surfaces
to be sealed.
Resistance to temperatures in the range – 55 to 200 °C (– 99 to
392 °F); where applied, it seals the surfaces against corrosion.
aprilia part# 8116067 (LOCTITE
®
8150 for screws)
Paste to be used on components subjected to high temperature.
aprilia part# 0297434 (LOCTITE
®
767 Anti-Seize 15378)
Lubricant and anticorodal resistant to high temperatures.
It must be sprayed on both components and makes sure the
sliding surfaces remain maintenance free for a long time.
It prevents corrosion.
aprilia part# 0297433
[MOLYKOTE
®
G-N (50 g)]]
Lubricating paste to be used on support points subjected to
heavy loads, for standard lubrication and on couplings under
pressure, in order to prevent corrosion which would prevent
subsequent disassembly.
To apply on the two surfaces.
aprilia part# 0297386 [SILASTIC
®
732 RTV (100 g)]
It is used as a sealant, preventing water from getting inside the
flywheel cover.
Release 00/2002-02
- 00