23
use and maintenance
ETV mille Caponord ABS
CONTROLS ON THE RIGHT PART OF THE
HANDLEBAR
NOTE
The electrical parts work only when the ignition switch
is in position
≈
>
∆
.
1) ENGINE STOP SWITCH (
>
-
?
)
!
WARNING
Do not operate the engine stop switch “
>
-
?
” in running
conditions.
This is a safety or emergency switch.
With the switch pressed in position
≈
>
∆
, it is possible to start
the engine; when the switch is pressed to position
≈
?
∆
, the
engine stops.
!
CAUTION
To stop the vehicle, use exclusively the ignition switch (A).
Leave the engine stop switch (1) in position “
>
” and use it
only in case of emergency.
!
CAUTION
With stopped engine and ignition switch in position “
>
”, the
battery may discharge.
If the engine stop switch must be used (1), immediately
afterwards turn the ignition switch (A) to position “
?
”.
2) START PUSH BUTTON (
F
)
When the start push button
≈
F
∆
is pressed, the starter makes
the engine run. For the starting, see p. 50 (STARTING).
ETVmille_ABS_UK.book Page 23 Friday, October 24, 2003 12:25 PM
