21
use and maintenance
ETV mille Caponord ABS
SWITCHING FROM TOTAL TO PARTIAL
KILOMETRE (MILE) ODOMETER
Left display
◆
Press and release the button
SET
(1);
t h e r e l e v a n t t o t a l p a r t i a l o r t o t a l
kilometres (miles) covered will appear on
the display.
NOTE
Whenever the ignition switch is
turned to position
≈
>
∆
, the display always
indicates the total number of kilometres
(miles) covered.
To set the partial kilometre (mile)
odometer to zero, proceed as follows:
◆
Display the partial number of kilometres
covered, see above.
◆
Press the button
SET
(1) for more than
three seconds; the segments (2) are set
to zero.
SETTING THE CLOCK (HOURS AND
MINUTES)
NOTE
The setting of the clock can be
carried out only with the vehicle at rest.
◆
Press the
MODE
(3) push button for
more than three seconds, the segments
corresponding to the hours (4) will blink.
NOTE
If the button
SET
(1) is pressed
and released, the data are changed one by
one; if the button
SET
(1) is kept pressed,
the data change scrolling quickly and
cyclically.
◆
Press the
SET
(1) push button and
select the desired hour.
◆
To confirm the time setting, press and
release the button
MODE
(3), and the
minute segments (5) will blink.
◆
Press the
SET
(1) push button and
select the desired minutes.
◆
To confirm the minute setting, press and
release the
MODE
(3) push button.
NOTE
If the battery is removed, the
clock is set to zero.
1
2
3
4
5
6
7
8
9
10
0
km
km/h
DIAGNOSIS
CONTROL
ENGINE
C
SET
SET
MODE
TIME
1
2
T AIR
DIAGNOSIS
CONTROL
ENGINE
L
C
SET
SET
MODE
MODE
TIME
1
3
4
5
T AIR
ETVmille_ABS_UK.book Page 21 Friday, October 24, 2003 12:25 PM
