AND Explosion Protected Weighing Indicator AD-4403-FP ST Series, Instruction Manual

Page: 92 / 112

C-5
Note Function # Function name Range Default
Sq F-14
Batch Finish output
width
0.0 - 25.5 (sec.) 0.0
Auto
Sq F-15
Batch monitoring
timer
0 – 255 (sec.) 0
Auto
Sq F-16
Supplementary flow
open timer
0.01 - 2.55 (sec.) 0.10
Auto
Sq F-17
Supplementary flow
close timer
0.1 - 25.5 (sec.) 0.1
Auto
Sq F-18
Discharge start wait
timer
0.0 - 25.5 (sec.) 0.0
Auto
Sq F-19
Discharge valve
close wait timer
0.1 - 25.5 (sec.) 0.1
Auto
Sq F-20
Discharging time
monitor timer
0 - 255 (sec.) 0
Auto
Sq F-21 Add the final to zero band setting 0
0
Does not add the final
Loss
1 Adds the final
Sq F-22 Add the final to full setting 0
0 Does not add the final
Loss
1
Adds the final
Sq F-23 Batch start function key 0
0 Disable
1 [ESC]
2
[+/-]
Sq F-24 Emergency stop function key 0
0 Disable
1
[ESC]
2 [+/-]
3 [ON/OFF]
Sq F-25 Discharge start function key 0
0
Disable
1 [ESC]
2
[+/-]
Only one among Sq
F-23, -24, and –25
can be used. When
two or more are set,
the function with a
higher priority
becomes available
and the others will be
disabled.
Priorities: Sq F-23 is
1st, Sq F-24 2nd, and
Sq F-25 3rd.
Sq F-26 Automatic Tare at batch start 0
0 Disable
Nozzle
1 Not disabled
It tares automatically when detects the “zero band” signal at a
weighing completion. (ready to re-start)