AND Explosion Protected Weighing Indicator AD-4403-FP ST Series, Instruction Manual

Page: 48 / 112

6-15
Note
* In the case of built-in-automatic program mode weighing, the set point data is held until batch finish since start of
batching. Therefore, a set point altered during batching takes effect after “batch finish” is output.
* Chart above is of the case;
•
“Acceptable weight” is on.
•
A judgement result becomes “Acceptable weight” at the third judgement after supplementary flow action has
been made twice.
*
SqF-26=”0”:Not tared at batch start