AND Explosion Protected Weighing Indicator AD-4403-FP ST Series, Instruction Manual

Page: 25 / 112

3-3
3-4 Recalling through Clearing Accumulation data
1. Recall the accumulation data (weight and count).
Press [CODE] [ code number (2 digits) ] [F] in this order. It shows;
Main display: “CodE XX” (Code number)
Sub display: “YYYYYY” (Accumulated weight)
Left LEDs: “TOTAL” LED turns on.
* Use numerical keys ([0] – [9]) to type a code number.
* Press [ESC] to cancel the input and re-input. Or erase the digits typed with [+/-] and continue
typing.
* Press [ESC] to return to the normal mode.
Recalling the accumulated count
Press [FUNC.] to recall the accumulated count. (Pressing [FUNC.] displays the accumulated
weight and the accumulated count alternately.) It shows;
Sub display: “nZZZZZZ” (Accumulated count)
Recalling the accumulation data in order of code number
Press [F] to recall in order of code number. The accumulation data of the code is displayed. Press
[F] to see the next.
Recalling the accumulation data designated by the code number
Press [CODE] [ code number (2 digits) ] [ENTER] in this order. The accumulation data of the code
is displayed.
2. Clear the accumulation data (if necessary).
Press [+/-] to select the accumulation data to be cleared. It shows;
Sub display: “CLEAr”
Left LEDs: “TOTAL” LED blinks.
Press [ENTER] to clear the data. it shows;
Sub display: “totAL”
Left LEDs: “TOTAL” LED blinks.
3. Escape from the accumulation data mode.
Press [ESC] to return to the normal mode.