Analytik Jena Biometra TAdvanced 384, Operating Manual

Page: 69 / 140

Biometra TAdvanced Starting, coping and deleting programs
69
8.2 Copying a program
Note: Users can only copy and save their own programs when the right Write/delete
own programs is activated. Programs of others can be copied and saved with the right
Write/delete all programs activated (see section "Editing user settings" p. 102).
Enable a user to copy and save own
programs
Enable a user to copy and save all pro-
grams of other users
To copy a program, touch the corresponding buttons to select a user directory and a pro-
gram on the Biometra TAdvanced program overview screen (see Fig. 43 p. 67). If the
number of user directories or programs is higher than the maximum number that can be
displayed in the list, the buttons above and below the lists can be used to scroll up and
down. To copy the selected program, press the Copy button.
Copy
Touch the corresponding buttons to select a user directory and a storage location on the
Biometra TAdvanced program overview screen (see Fig. 46). The program to be copied
is highlighted in green. If the number of user directories or programs is higher than the
maximum number that can be displayed in the list, the buttons above and below the
lists can be used to scroll up and down. To save the selected program, press the Save
button.
Save
Note : If the selected storage location is already in use, the stored program will not be
overwritten; instead this program and all other following programs will be moved one
position higher. The storage location number for these programs will increase by +1 and
the new program is saved at the selected location.