![background image](http://html.mh-extra.com/html/amx/modero-viewpoint-mvp-8400i/modero-viewpoint-mvp-8400i_operation-reference-manual_2938039046.webp)
Configuring Communications
32
MVP-8400i 8.4" Modero® ViewPoint® Touch Panel with Intercom
10.
Click the
OnLine Tree
tab in the Workspace window to view the devices on the Virtual System.
The
default System value is
one
.
11.
Right-click on the
Empty Device Tree/System
entry and select
Refresh System
to re-populate the
list.
12.
Connect the terminal end of the PS4.4 power cable to the 12 VDC power connector on the side of
the stand-alone touch panel.
If the MVP is installed onto a docking station, feed power to the docked panel by connecting
the appropriate power supply to the docking station.
13.
After the panel powers-up, press and hold the two lower buttons on both sides of the display (
for 3
seconds
) to continue with the setup process and proceed to the Setup page.
14.
Select
Protected Setup
>
System Settings
(located on the lower-left) to open the System Settings
page (FIG. 29).
15.
Press the blue
Type
field until the choice cycles to the word
Ethernet.
16.
Press the
Mode
field until the choice cycles to the word
URL
.
By selecting
URL
, the System Number field becomes read-only (grey) because the panel pulls
this value directly from the communicating target Master (virtual or not). A Virtual Master
system value can be set within the active AMX software applications such as: NetLinx Studio,
TPD4, or IREdit.
17.
Press the
Master IP/URL
field to open a Keyboard and enter the IP Address of the PC used as the
Virtual Master.
18.
Click
Done
to accept the new value and return to the
System Settings
page.
19.
Do not alter the Master Port Number value (
this is the default value used by NetLinx
).
20.
Press the
Back
button to open the
Protected Setup
page.
21.
Press the on-screen
Reboot
button to both save any changes and restart the panel.
FIG. 29
Sample System Settings page (for Virtual Master communication)
Enter the IP Address
information of the PC
used as a Virtual
Master
The System Number is
assigned to the Master
within the AMX
software application
(these must match)
When using a Virtual Master,
there is no need to enter a
username and/or password
Summary of Contents for Modero ViewPoint MVP-8400i
