manualshive.com logo in svg

AMX Modero ViewPoint MVP-8400i, Operation/Reference Manual

Share
Download
AMX Modero ViewPoint MVP-8400i Operation/Reference Manual Download Page 106

Setup Pages

92

 MVP-8400i 8.4" Modero® ViewPoint® Touch Panel with Intercom

Features on this page include:  

Checking the Panel Connection Logs

1.

Press the 

Tools 

button in the 

Protected Setup Navigation Buttons

 section. This opens the 

Tools 

menu.

2.

Within the 

Tools 

menu, press the 

Panel Logs 

button. All connection data is contained in the section 

Connection Logs

.

Refreshing the Panel Connections Log

1.

Press the 

Tools 

button in the 

Protected Setup Navigation Buttons

 section. This opens the 

Tools 

menu.

2.

Within the 

Tools 

menu, press the 

Panel Logs 

button.

3.

Push the 

Refresh

 button.

Clearing the Panel Connections Log

1.

Press the 

Tools 

button in the 

Protected Setup Navigation Buttons

 section. This opens the 

Tools 

menu.

2.

Within the 

Tools 

menu, press the 

Panel Logs 

button.

3.

Push the 

Clear

 button.

4.

Confirm your selection.

Panel Connection Logs Page 

Back:

Saves all changes and returns to the previous page.

Connection Status icon:

The icon in the upper-right corner of each Setup page shows online/offline state 
of the panel to the master.

• Bright red - disconnected

• Bright green - connected. Blinks when a blink message is received to dark 

green every 5 seconds for half a second then go back to bright green.

• Bright yellow - panel missed a blink message from the master. It will remain 

yellow for 3 missed blink messages and then turn red. It will return to green 
when a blink message is received.

Note

: a Lock appears on the icon if the panel is connected to a secured NetLinx 

Master.

Connection Logs

A history of all connections, attempts, and failures for the panel.

Clear

Clears the Connection Logs history.

Refresh

Refreshes the Connection Logs history.

Page

Indicates the current page of the Connection Logs.

Use the Up and Down arrows to move from one page to the next.

Summary of Contents for Modero ViewPoint MVP-8400i























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands