![background image](http://html.mh-extra.com/html/amx/modero-viewpoint-mvp-8400i/modero-viewpoint-mvp-8400i_operation-reference-manual_2938039206.webp)
Appendix C: Troubleshooting
192
MVP-8400i 8.4" Modero® ViewPoint® Touch Panel with Intercom
If there is a yellow exclamation point next to the AMX USB LAN LINK device (within the hardware
devices section of the Unplug or Eject Hardware window), stop and close the USB operation. Reconnect
the USB cable to the panel and repeat the setup procedures.
To remove the USB driver association
from a previously connected touch panel, you must navigate
back to the Device Manager, right-click on the panel’s USB driver (example AMX USB LAN LINK #2)
and select
Uninstall
from the context menu and then
OK
.
Once the system completes the removal of the device, the Device Manager window will
refresh, and the device will no longer appear.
The next time this device is connected to the computer it will appear as a new hardware device
and will need to be associated again with the driver (refer to
Configure the panel for USB
communication
section on page 27).
Checking AMX USBLAN Device Connections via NetLinx Studio
Use the CC-USB Type-A to Mini-B 5-wire programming cable (
FG10-5965
) to provide communication
between the mini-USB Program port on the touch panel and the PC. This method of communication is
used to transfer firmware KIT files and TPD4 touch panel files.
1.
Verify this direct USB connection (Type-A on the panel to mini-USB on the panel) is configured
properly using the steps outlined in the previous two sections.
2.
With the panel already configured for USB communication and the Virtual Master setup within
NetLinx Studio, its now time to verify the panel is ready to receive files.
3.
Click the
OnLine Tree
tab in the Workspace window to view the devices on the Virtual System.
The default System value is one
.
4.
Right-click on the System entry (
A
in FIG. 80) and select
Refresh System
. This causes a refresh of
all project systems, establishes a new connection to the Virtual Master, and populates the System list
with devices on your particular system.
FIG. 79
USB Properties windows (Windows Device Manager)
USB
detection
icon
A mini-USB connection is only detected after it is installed onto an active panel.
Connection to a previously powered panel which then reboots, allows the PC to
detect the panel and assign an appropriate USB driver.
Summary of Contents for Modero ViewPoint MVP-8400i
