manualshive.com logo in svg

AMX Modero ViewPoint MVP-8400i, Operation/Reference Manual

Share
Download
AMX Modero ViewPoint MVP-8400i Operation/Reference Manual Download Page 68

Setup Pages

54

 MVP-8400i 8.4" Modero® ViewPoint® Touch Panel with Intercom

Time & Date Settings

The options on the Time & Date Settings page (FIG. 47) allow you to set and adjust time and date 
information on the NetLinx Master. If the time and/or date on the Master is modified, all connected 
devices will be updated to reflect the new information.  

Features on this page include:  

FIG. 47  

Time and Date Setup page

MVP touch panels do not have an on-board clock. The only way to modify a panel’s 
time without altering the Master is via NetLinx Code.

Time & Date Settings Page

Back:

Saves all changes and returns to the previous page.

Connection Status icon:

The icon in the upper-right corner of each Setup page shows online/offline state of 
the panel to the master.

• Bright red - disconnected

• Bright green - connected. Blinks when a blink message is received to dark green 

every 5 seconds for half a second then go back to bright green.

• Bright yellow - panel missed a blink message from the master. It will remain 

yellow for 3 missed blink messages and then turn red. It will return to green 
when a blink message is received.

Note

: a Lock appears on the icon if the panel is connected to a secured NetLinx 

Master.

Time Date Refresh/Set:

This section provides two options:

• The 

Get Time/Date

 button retrieves Time and Date information from the Master.

• The 

Set Time/Date

 button sets the Master to retain and save any time/date 

modifications made on the panel. 

Time Display fields:

• These fields display the time in three formats: STANDARD, STANDARD AM/PM, 

and 24 HOUR.

Date Display fields:

• These fields display the calendar date information in several different formats. 

Summary of Contents for Modero ViewPoint MVP-8400i























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands