![background image](http://html.mh-extra.com/html/amx/modero-viewpoint-mvp-8400i/modero-viewpoint-mvp-8400i_operation-reference-manual_2938039179.webp)
Programming
165
MVP-8400i 8.4" Modero® ViewPoint® Touch Panel with Intercom
^RAF, ^RMF - Embedded Codes
The ^RAF and ^RMF commands add and modify any and all resource parameters by sending embedded codes
and data:
"'^RAF-<resource name>,<data>'"
"'^RMF-<resource name>,<data>'"
The <data> variable uses the embedded codes described in the following table:
Dynamic Image Commands (Cont.)
^RFRP
Force a refresh for
a given resource
regardless of
current view.
This command can be used by programmers to prefetch images that will be needed soon.
Syntax:
“’^RFRP-<resource name>’”
Variable:
resource name = 1 - 50 ASCII characters.
Example:
SEND_COMMAND Panel, “’^RFRP-DopplerRadarDFW’”
Performs an update or prefetch on the resource named “DopplerRadarDFW”, even if the
image is not in the current view.
^RMF
Modify an
existing resource.
Modifies any and all resource parameters by sending embedded codes and data.
Since the embedded codes are preceded by a '%' character, any '%' character contained
in the URL must be escaped with a second '%' character (see example).
The file name field (indicated by a
%F
embedded code) may contain special escape
sequences as shown in the
^RAF, ^RMF - Embedded Codes
section on page 166.
Syntax:
"'^RMF-<resource name>,<data>'"
Variables:
• resource name = 1 - 50 ASCII characters
• data = Refers to the embedded codes, see the
^RAF, ^RMF - Embedded Codes
section
on page 166.
Example:
SEND_COMMAND Panel,"'^RMF-Sports_Image,%ALab%%5FTest/
Images%Ftest.jpg'"
Changes the resource ’Sports_Image’ file name to ’test.jpg’ and the path to ’Lab_Test/
Images’.
Note that the
%%5F
in the file path is actually encoded as
%5F
.
^RSR
Change the
refresh rate for a
given resource.
Syntax:
"'^RSR-<resource name>,<refresh rate>'"
Variable:
resource name = 1 - 50 ASCII characters.
refresh rate = Measured in seconds.
Example:
SEND_COMMAND Panel,"'^RSR-Sports_Image,5'"
Sets the refresh rate to 5 seconds for the given resource (’Sports_Image’).
^RAF, ^RMF - Embedded Codes
Parameter Embedded Code
Description
protocol
’%P <0-1>’
Set protocol. HTTP (0) or FTP (1).
user
’%U <user>’
Set Username for authentication.
password
’%S <password>’
Set Password for authentication.
host
’%H <host>’
Set Host Name (fully qualified DNS or IP Address).
Summary of Contents for Modero ViewPoint MVP-8400i
