![background image](http://html.mh-extra.com/html/amx/modero-viewpoint-mvp-8400i/modero-viewpoint-mvp-8400i_operation-reference-manual_2938039047.webp)
Configuring Communications
33
MVP-8400i 8.4" Modero® ViewPoint® Touch Panel with Intercom
Using G4 Web Control to Interact with a G4 Panel
The G4 Web Control feature allows you to use a PC to interact with a G4 enabled panel via the web. This
feature works in tandem with the new browser-capable NetLinx Security firmware update (
build 300 or
higher
). G4 Web Control is only available with the latest Modero panel firmware.
Refer to the
G4 Web Control Settings Page
section on page 82 for more detailed field information.
1.
Press and hold the two lower buttons on both sides of the display for
3 seconds
to open the Setup
page.
2.
Press the
Protected Setup
button (located on the lower-left of the panel page) to open the Protected
Setup page and display an on-screen keypad.
3.
Enter
1988
into the Keypad’s password field (
1988
is the default password
).
4.
Press
Done
when finished.
5.
Press the
G4 WebControl
button to open the G4 Web Control page (FIG. 30).
6.
Press the
Enable/Enabled
button until it toggles to
Enabled
(
light blue color
).
7.
The
Network Interface Select
field is read-only and displays the method of communication to the
web.
Wireless
is used when a wireless card is detected within the internal card slot. This method
provides an indirect communication to the web via a pre-configured Wireless Access Point.
8.
Press the
Web Control Name
field to open the Web Name keyboard.
Verify your NetLinx Master (ME260/64 or NI-Series) has been installed with the latest
firmware KIT file from
www.amx.com
. Refer to your NetLinx Master instruction
manual for more detailed information on the use of the new web-based NetLinx
Security.
Clearing Password #5, from the initial Password Setup page, removes the need for
you to enter the default password before accessing the Protected Setup page.
FIG. 30
G4 Web Control page
The Network Interface Select field is read-only and defaulted to
Wireless (since
there is no Ethernet cable connection)
.
Summary of Contents for Modero ViewPoint MVP-8400i
