![background image](http://html.mh-extra.com/html/amx/modero-viewpoint-mvp-8400i/modero-viewpoint-mvp-8400i_operation-reference-manual_2938039075.webp)
Setup Pages
61
MVP-8400i 8.4" Modero® ViewPoint® Touch Panel with Intercom
Protected Setup Page (Cont.)
Docking Station:
•
Dock Status
- illuminates when the MVP is docked and communicating with
the Docking Station.
•
Undock Panel
- forces the docking station to release the MVP without
requiring a User Access username or password.
•
Disable Docking Station LED
- disables the display of the LEDs on the
docking station.
Options:
•
Function Show
- toggles the display of the channel port, channel code, level
port and level code on all touch panel buttons (see FIG. 51).
•
Telnet
- enables/disables the panel’s telnet server (to allow direct telnet
communication to the panel).
•
Page Tracking
- toggles the page tracking function. When enabled, the panel
reports page data to the NetLinx Master.
•
Front Button Setup Access
- activates the two lower buttons on the front of
the panel for accessing the Setup and Calibration pages (see FIG. 41 on
page 47). The default setting is On.
-
Press and hold these buttons for
3 seconds
to access the Setup page.
- Press and hold these buttons for
6 seconds
to access the Calibration page.
•
Standard Security
- This button is blocked out.
System Recovery:
•
Remove User Pages
- allows you remove all TPD4 touch panel pages
currently on the panel, including the pre-installed AMX Demo pages. This
option invokes a Confirmation dialog, prompting you to confirm your selection
before removing the panel pages.
Note that the
YES
button on the Confirmation dialog is disabled for 5 seconds
as additional protection against accidentally resetting the panel or removing
the panel pages.
•
Reset System Settings
- deletes all of the current configuration parameters
on the panel (including IP Addresses, Device Number assignments,
Passwords, and other presets). This option invokes a Confirmation dialog,
prompting you to confirm your selection before resetting the panel.
Reboot / Shutdown:
•
Reboot
- pressing this button causes the panel to reboot after saving any
changes.
•
Shutdown
- This button will shut down the panel entirely, requiring a manual
restart. This button is disabled when the panel is connected to a power
source such as a docking station, and will only be enabled when running on
battery power.
FIG. 51
Function Show example
Channel Code
3,132
2,8
3,50
Channel Port
Level Port
Address Port
Address Code
Channel Code
BUTTON
Summary of Contents for Modero ViewPoint MVP-8400i
