manualshive.com logo in svg

AMX Modero ViewPoint MVP-8400i, Operation/Reference Manual

Share
Download
AMX Modero ViewPoint MVP-8400i Operation/Reference Manual Download Page 64

Setup Pages

50

 MVP-8400i 8.4" Modero® ViewPoint® Touch Panel with Intercom

Project Information Page

The Project Information page displays the project properties of the TPDesign4 project file currently 
loaded on the panel (FIG. 45).  

Features on this page include:  

FIG. 45  

Project Information page

Project Information Page 

Back:

Saves all changes and returns to the previous page.

Connection Status icon:

The icon in the upper-right corner of each Setup page shows online/offline state of 
the panel to the master.

• Bright red - disconnected

• Bright green - connected. Blinks when a blink message is received to dark green 

every 5 seconds for half a second then go back to bright green.

• Bright yellow - panel missed a blink message from the master. It will remain 

yellow for 3 missed blink messages and then turn red. It will return to green 
when a blink message is received.

Note

: a Lock appears on the icon if the panel is connected to a secured NetLinx 

Master.

File Name:

Displays the name of the TPDesign4 project file downloaded to the panel.

Designer ID:

Displays the designer information.

File Revision:

Displays the revision number of the file.

Dealer ID:

Displays the dealer ID number (

unique to every dealer and entered in TPD4

).

Job Name:

Displays the job name.

Sales Order:

Displays the sales order information.

Purchase Order:

Displays the purchase order information.

AMX IR 38K Port:

Displays the AMX 38 kHz IR channel port used by the IR Emitter on the panel.

• This information is specified in TPD4 (Project Properties > IR Emitters & 

Receivers tab).

• For example if you set the AMX IR 38K Port to 

7

 and then put a button on the 

panel with a channel code of 

5

 and a port of 

7

, it will trigger the IR code in slot 5 

of the AMX IR 38K Port.

AMX IR 455K Port:

Displays the AMX 455 kHz IR channel port used by the IR Emitter on the panel.

Summary of Contents for Modero ViewPoint MVP-8400i























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands