AMX Modero ViewPoint MVP-8400i, Operation/Reference Manual

Page: 17 / 214

MVP-8400i Modero Viewpoint Wireless Touch Panel With Intercom
3 MVP-8400i 8.4" Modero® ViewPoint® Touch Panel with Intercom
MVP-8400i Specifications (FG5965-04) (Cont.)
Power Modes: • ON: Panel is fully functional.
• STANDBY: Panel uses low power, the LCD/backlight is shutdown, LEDs still
function. Panel resumes the ON mode in ~ 1 second.
• OFF: On-board programs not running, touch screen still powered, LED not
functional. Panel resumes the ON mode in ~ 30 seconds.
Battery Duration:

(per battery)
• Eight hours of normal use (25% On state, 25% Standby, and 50% Off).
• Four hours of continuous use (continuous On state).
The MVP-8400i panel is shipped with two MVP-BP batteries. You must use
both batteries to obtain the duration times given above.
Memory (factory default): • 128 MB SDRAM
• 128 MB Compact Flash (upgradable to 1 GB) - factory programmed
Weight: 1.85 lbs (0.84 kg)
• with 1 battery: 2.25 lbs (1.02 kg)
• with 2 batteries: 2.65 lbs (1.20 kg)
MVP-8400i LCD

Specifications:
• Aspect ratio: 4 x 3
• Brightness (luminance): 180 cd/m
2
• Channel transparency: 8-bit Alpha blending
• Contrast ratio: 350:1
• Display colors: 256K colors (18-bit color depth)
• Dot/pixel pitch: 0.21 mm
• Panel type: TFT Color Active-Matrix
• Screen resolution: 800 x 600 pixels (HV) @ 60 Hz frame frequency
• Viewing angles (vertical): + 60° / - 40° (from center)
Active Screen Area: • 6.71” x 5.03” (17.04cm x 12.78cm)
External Components:
Docking station interface

connector:
Metallic strip connector located on the bottom panel provides communication
and power between the panel and the optional docking stations.
LEDs: Two sets of NetLinx programmable LEDs (supporting On, Off, and Blink).
Default blink patterns:
- Stylus LED: Blink = Batteries charging , On = Batteries charged .
- Front panel LED: Blink = Panel booting, On = Panel operating properly .
Mini-USB connector: 5-pin mini-USB connector for programming, firmware update, and file transfer.
Power connector: • 2.1mm barrel-style power jack, for use with the included PS4.4 power supply.
Stylus slot: • Illuminated slot where the included stylus is stored, located on the left side of
the MVP.
External Buttons: • Nine programmable pushbuttons (four located on the left of the LCD and five
located on the right in a joystick configuration).
Internal Components:
Wireless Interface card: Provides 802.11 (CF Type I) wireless connectivity between the panel and a

Wireless Access Point (such as the NXA-WAP200G).
IR Emitters: Transmit IR over 20 feet (6.10 m).
Internal speaker: Single 2 watt speaker.
Internal microphone For use with the intercom feature
Battery compartment: Houses up to 2 MVP-BP Power Packs.