User Manual – Rev J
CS Series
California Instruments
76
4.2.13 Elapsed Time and Temperature Screen
The Etime/Temp screen displays the elapsed time since the power source has first been turned
on. This is an accumulated total time in hours, minutes and seconds.
The same screen also displays the internal temperature of the power supply.
ENTRY
DESCRIPTION
ETIME
01:23:45
The ETIME field displays the total
accumulated elapsed time for the instrument
since it's initial manufacture. This value
cannot be changed or reset.
TEMP
37.342°
The TEMP field is not a user selectable
parameter but rather a read-out of the internal
temperature in degrees Celsius. It is provided
for informational purposes only.
4.2.14 LIMIT
Menu
The Limit menu displays the maximum available value for current, frequency and compliance
voltage of the power supply. This screen is used for information only and contains no user
changeable fields. The limit values shown cannot be changed.
ENTRY
DESCRIPTION
LIM LVOLT
Low Voltage
Range
Displays low compliance voltage range value.
HVOLT
High Voltage
Range
Displays low compliance voltage range value.
On CS Series with only one compliance voltage
range, both Low and High Limit are set to same
value.
LIM LFREQ
Low Frequency
Limit
Displays minimum available output frequency.
HFREQ
High Frequency
Limit
Displays maximum available output frequency.
CURR
C range
Displays maximum available current per phase
for three-phase mode per chassis at maximum
compliance voltage (Thus, not including
constant power mode.)
