Use of the machine
The hopper should not be emptied:
2. Close the slider (Fig. 186/1).
Fig. 186
2. Empty the hopper and dosing unit.
2.1 Turn the handle (Fig. 187/1).
→
The residue emptying flap opens to al-
low emptying of the hopper and dosing
unit.
3. Repeat the procedure on the second dosing
unit (if fitted).
Fig. 187
3. Empty the injector sluice (Fig. 188/1).
4.1 Open the injector sluice flap (Fig.
188/1).
→
Emptying the injector.
5. Repeat this procedure on the second injec-
tor sluice (if fitted).
Fig. 188
CAUTION
Risk of contusions on opening and closing the injector sluice
flap (Fig. 188/1)!
Hold the injector sluice flap only by the lug (Fig. 188/2), other-
wise there is a danger of injury when the spring-loaded injector
sluice flap snaps closed.
Never insert your hand between the injector sluice flap and the
injector sluice!
6. Empty the dosing units and the dosing rollers completely.
6.1 Run the electric motor briefly.
7. To completely clean the dosing unit, remove and refit the dosing
Cirrus BAH0049-1 09.14
169
