Settings
8.6.2
Setting the exact harrow pressure
1. Tension the lever (Fig. 133/1) with the cali-
bration crank.
2. Insert the bolt (Fig. 133/2) into a boring
under the lever.
3. Relieve the lever.
4. Secure the bolt with a spring pin.
5. Apply the same setting to all adjusting seg-
ments.
Fig. 133
8.6.2.1
Setting the exact harrow pressure (hydraulic adjustment)
WARNING
Direct people out of the danger area.
1. Select the coulter button
on the
AMATRON 3 and by actuating control unit
green
ο
admit pressure to the hydraulic cylin-
der or
ο
put it in float position.
2. Apply the tractor parking brake, switch off
the tractor engine and remove the ignition
key.
3. Insert one pin each (Fig. 134/1) under and
over the lever into the adjusting segment
and secure it with safety splints.
Fig. 134
128
Cirrus BAH0049-1 09.14
