Settings
8.7
Roller harrow
DANGER
Make adjustments only when the tractor parking brake is ap-
plied, the engine switched off and the ignition key removed.
8.7.1
Setting working depth and angle of harrow tines
1. Raise the machine above the integrated running gear only
enough so that the harrow tines are immediately above the
ground, but not touching it.
2. Apply the tractor parking brake, switch off the tractor engine and
remove the ignition key.
3. Hold the harrow tines beam by the carrier
handle (Fig. 135/3).
4. Set the working depth of the harrow tines by
positioning the carrying arm with the bolt
(Fig. 135/1)
ο
in all segments
ο
in the same hole.
Fig. 135
The deeper the pin is inserted in the adjusting
segment, the greater the work depth.
5. After each repositioning, secure the pin with
safety splint.
Cirrus BAH0049-1 09.14
129
