Use of the machine
10.5.1
Load the seed hopper with sacked merchandise from a supply vehicle
1. Approach the open loading edge of the
trailer with the Cirrus.
2. Put the tractor on an extreme steering lock
(approx. 90° to the machine).
3. Reverse onto the supply vehicle until the
loading plate is lying up against the supply
vehicle with no gap, but is not touching the
vehicle (marshalling person required).
4. Raise / lower the tractor's lower link until the
loading plate and the loading area of the
trailer are level.
5. Apply the tractor parking brake, switch off
the tractor engine and remove the ignition
key.
6. Fill the seed hopper from the loading plate
only and constantly ensure firm support
when transporting the sacked merchandise.
Fig. 178
DANGER
Manoeuvring the Cirrus requires a marshalling person.
Never stand between the supply vehicle and the machine.
Always hold tight when crossing the loading plate and supply
vehicle (danger of stumbling).
10.5.2
Loading the seed hopper with a filling auger
1. Apply the tractor parking brake, switch off
the tractor engine and remove the ignition
key.
2. Approach the machine carefully with the
supply vehicle.
3. Load the seed hopper via the filling auger in
consideration of the manufacturer's instruc-
tions.
Fig. 179
CAUTION
Never move between the supply vehicle and the machine.
Cirrus BAH0049-1 09.14
159
