Settings
3. Slacken but do not unscrew the two winged
nuts (Fig. 120/1).
4. Turn the bearing cover and pull it off.
Fig. 120
5. Pull the dosing roller out of the seed doser.
6. Refer to table for the requisite dosing roller
and install in the reverse order.
Fig. 121
7. Repeat the procedure for the second dosing unit (if fitted). Equip
both seed dosing units with the same dosing roller.
Don't forget to open all sliders (Fig. 118/1).
Secure each slider with a linch pin (Fig. 118/2).
Cirrus BAH0049-1 09.14
119
