Layout and function
AD-P 30/35/4001 SPECIAL BAH0095-2 11.17
71
5.9.1
Seed tube monitoring
The seed tube hoses represent the connection
between the distributor head and the coulters.
Each seed tube hose can be equipped with a
sensor (Fig. 50/1) that detects the seed flow.
A warning message is issued when the seed flow
in a monitored seed line hose is interrupted or
large deviations occur in the flow rate between
the monitored seed line hoses.
Fig. 50
Connect the seed tube monitoring, also in combination with the A, to an ISOBUS-compatible
control terminal, e.g. AmaTron 3 (see "Seed tube monitoring" operating manual).
As a standard, the seeding combination is equipped with a working position sensor, which transmits
the pulses to switch the electric motor for the metering roller drive on and off. The equipment of your
seed drill with seed tube monitoring requires a second working position sensor. This working position
sensor supplies the pulse for switching the seed tube monitoring on and off.
The working position sensors can be installed as follows:
Implement combination with ISOBUS system:
Analogue
working position sensor (Fig. 51/1)
for an implement combination
with ISOBUS system
Working position sensor (Fig. 51/2)
for seed tube monitoring
with adjustment magnet (Fig. 51/3).
Fig. 51
Implement combination with A:
Digital
working position sensor (Fig. 52/1)
for an implement combination
with A
Working position sensor (Fig. 52/2)
for seed tube monitoring
with adjustment magnet (Fig. 52/3).
Fig. 52
