Transportation
AD-P 30/35/4001 SPECIAL BAH0095-2 11.17
161
9 Transportation
DANGER
In Germany and several other
countries, the transportation of
implements hitched to the tractor
on public roads and routes is ap-
proved up to a width of 3.0 m.
Fig. 207
Transport of a combination over 3.0 m wide is
only permitted on a transport vehicle in these
countries. Place and secure the combination
consisting of soil tillage implement, roller and
pack top seed drill on the transport vehicle in
accordance with regulations. Do not exceed the
max. transport height of 4.0 m.
The transport width for your seed drill can be
found in the "Technical data" section, page 47.
9.1
Moving the seeding combination into transport position
1. Switch off the fan.
2. On the control terminal, raising the track marker makes the tramline counter ad-
vance. The tramline counter can be prevented from advancing (see "ISOBUS
software" operating manual or "A" operating manual).
3. Fold and lock the track markers........................................................................................ Page 153
4. Check if the permissible values for the total tractor weight, axle loads and tyre
load-bearing capacity are maintained when the seed hopper is full................................... Page 93
5. If necessary, empty the hopper ........................................................................................ Page 171
6. Close the roller tarpaulin of the seed hopper.
7. Fold up the steps .............................................................................................................. Page 126
8. Move the tramline marker into transport position ............................................................. Page 155
9. Move the pulse wheel into transport position ................................................................... Page 160
10. Switch off the control terminal
(see the "Control terminal" operating manual or "A" operating manual)
11. Move the exact following harrow into transport position ................................................... Page 144
12. Move the transport safety bar of the exact following harrow into transport position ........ Page 159
13. Switch off the work floodlights ........................................................................................... Page 91
14. Check the lighting system including the warning signs for proper function and
cleanliness .......................................................................................................................... Page 42
15. Disable the tractor control units required for operating the implement
(see also tractor operating manual).
16. Read and observe section 9.2:
Legal guidelines and the safety instructions before and during road transport.
17. Before driving off, switch on the warning beacon and check for proper function.
