Coupling and uncoupling the implement
116
AD-P 30/35/4001 SPECIAL BAH0095-2 11.17
12. Loosen the 2 hex. nuts (Fig. 116/2).
13. Push the pin receptacle (Fig. 116/1) until
the pin can be easily inserted.
14. Tighten the 2 hex. nuts.
15. Secure the pin against twisting by inserting
the linch pin through the holes of the pin re-
ceptacle (Fig. 116/1) and the pin.
Fig. 117
16. Pull out the parked pins (Fig. 118/1).
Fig. 118
17. Insert the 4 pins (Fig. 119/1) in the pendu-
lum mounts. The pins secure the connec-
tion of the pendulum mount with the pendu-
lum support.
18. Secure the pins with linch pins.
Fig. 119
19. Raise the combination so that the parking
supports (Fig. 120/1) are just above the
ground.
20. Remove the parking supports.
Fig. 120
